EasyManua.ls Logo

Thermcraft LBO-24-10-10-1T-J14642/1A User Manual

Default Icon
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
APPRECIATES YOUR BUSINESS
We thank you for purchasing a Thermcraft, Inc. heat treating oven. Since
our establishment in 1971, Thermcraft, Inc. has manufactured reliable, high
quality, electric resistance and gas equipment. Our products are used in a variety
of applications both domestically and around the world.
For over 40 years, Thermcraft, Inc. has manufactured ovens and ovens to
comply with predetermined custom and industrial specifications. This oven has
been completely checked for mechanical and electrical compliance prior to
shipment.
We trust you have received your oven in acceptable condition and that
you will find it meets or exceeds your expectations and requirements.
Prior to installation and operation of your new Thermcraft, Inc. oven, we
strongly urge you to read this manual it its entirety and comply with all
instructions herein.
If you have any questions, feel free to contact us.
Made in the U.S.A
Sincerely,
Thermcraft, Inc.
3950 Overdale Road
Winston-Salem, NC 27117-2037, U.S.A.
Telephone (336) 784-4800
Fax (336) 784-0634
Email: tci@thermcraftinc.com
Web: www.thermcraftinc.com
100-340-726 A
Question and Answer IconNeed help?

Do you have a question about the Thermcraft LBO-24-10-10-1T-J14642/1A and is the answer not in the manual?

Thermcraft LBO-24-10-10-1T-J14642/1A Specifications

General IconGeneral
BrandThermcraft
ModelLBO-24-10-10-1T-J14642/1A
CategoryOven
LanguageEnglish

Summary

1.) Oven Specifications

2.) Inspection and Damaged Instructions

5.) Control Environmental Conditions

6.) Installation and Power Connection

7.) Operational Safety

Safety Symbols and Practices

Explains hazard symbols and recommended safe operating practices.

Operational Warnings and Precautions

Covers warnings on modifications, parts, and general hazards.

8.) General Information for Test Frame Ovens

9.) Preventive Maintenance

13.) Oven Trouble Shooting

15.) Control System Operation

16.) Standard Configuration

Operator Configuration

Details Operator.SP and Operator.OP configuration settings.

Instance Configuration

Details Config.INST, Config.PU, and Config.IP settings.

Module Configuration

Details Config.HA, Config.1A, and Config.2A settings.

17.) Over-Temperature Controller Operation