EasyManua.ls Logo

Thermo Scientific ALPS 3000 User Manual

Thermo Scientific ALPS 3000
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Thermo Scientific ALPS 3000
Automated Laboratory
Plate Sealer
User Manual
Question and Answer IconNeed help?

Do you have a question about the Thermo Scientific ALPS 3000 and is the answer not in the manual?

Thermo Scientific ALPS 3000 Specifications

General IconGeneral
BrandThermo Scientific
ModelALPS 3000
CategoryFood Saver
LanguageEnglish

Summary

Introduction to ALPS 3000

ALPS 3000 Overview

Key features and capabilities of the ALPS 3000 automated plate sealer.

Operational Procedure Overview

Summary of the plate sealing process using the ALPS 3000 shuttle system.

Health and Safety

Warning Symbols and Environmental Requirements

Explanation of IEC 417 warning symbols and required operating environmental conditions.

Cautionary Notes and Fuse Info

Safety Precautions and Voltage Supply

Essential operational warnings, hot component handling, and voltage supply requirements.

Mains Plug and Fuse Specifications

Details fuse types for different voltage supplies and plug specifications.

Operating Environment and Footprint

Environment, Dimensions, and Placement

Recommended environment, physical dimensions, and space requirements for the unit.

Air Supply Connection

Air Supply Requirements and Connection

Specifies air supply pressure, flow rate, and connection details for the ALPS 3000.

Voltage Supply Connection

Power Connection and Voltage Range

Explains AC power connection and the unit's self-regulation for voltage differences.

Foil/Film Loading Procedure

Loading Heat Sealing Film

Step-by-step instructions for threading and loading heat sealing film into the ALPS 3000.

Operational Procedure

Temperature and Time Settings

Guide to recommended sealing time and temperature settings for different plate materials.

Commands, Indications, and Warnings

Overview of software commands, display indications, and warning signals.

Operational Settings and Modes

Adjusting Sealing Parameters and Modes

Instructions for setting sealing time/temperature, loading foil, and configuring operational modes.

Communication Protocol

Serial Port Setup and Cable Requirements

Details serial port configuration and the required PC to ALPS cable.

Remote Operation and Initialization

Configuring the unit for remote operation and understanding system initialization.

Communication Protocol: Status and Commands

Status Message and Sealing Commands

Querying status, interpreting bit values, and initiating sealing operations.

Sealing Conditions and Errors

Details conditions preventing sealing and potential error states.

Communication Protocol: Errors and Parameters

Error Numbers and Parameter Messages

Lists error numbers and messages for setting/reading sealing temperature and time.

Communication Protocol: Reading Values

Reading Sealing Time and Temperature

Instructions to retrieve current sealing time and actual sealing temperature values.

Cleaning the ALPS 3000

Cleaning Precautions and Restrictions

Essential safety precautions and restrictions, including what not to use for cleaning.

ALPS 3000 Specifications

Technical Specifications Summary

Key technical specifications including power supply, dimensions, weight, and operating parameters.

Fault Finding

Maintenance and Troubleshooting Contacts

Advises on maintenance, initial fault inspection, and provides support contact information.

Fault Finding: Common Issues

Troubleshooting Common Faults

Lists common faults and recommended actions to resolve them for the ALPS 3000.

Sealing Tapes

Compatible Tapes and Materials

Details compatible sealing tapes, their material compatibility, and sealing conditions.

Sealing Tapes: Additional Options

Thermo Seal and Clear Seal Strong Tapes

Describes Thermo Seal and Clear Seal Strong tapes, applications, and integrity ranges.