Thermo 42i - Removing the Measurement Bench and Lowering the Partition Panel

Servicing
Removing the Measurement Bench and Lowering the Partition Panel
7-8 Model 42i Low Source Instruction Manual Thermo Electron Corporation
Removing the
Measurement Bench
and Lowering the
Partition Panel
The measurement bench can be removed and the partition panel can be
lowered to improve access to connectors and components. Refer to the
following steps when a procedure requires lowering the partition panel (see
Figure 7-3).
Figure 7-3. Remove the Measurement Bench Screws
Loosen Captive Screw
Pass Through
Connectors
Partition Panel
Remove Screw
Remove Screw
Remove Screws
REMOVE SCREWS