C-Link Protocol Commands
Hardware Configuration
B-34 Model 49i Primary Standard Instruction Manual Thermo Fisher Scientific
Hardware
Configuration
contrast
This command reports the screen’s level of contrast. The example that
follows shows the screen contrast is 50%, according to Table B-7.
Send: contrast
Receive: contrast 5: 50%
set contrast level
This command sets the screen’s level of contrast, according to Table B-7.
The example that follows sets the contrast level to 50%.
Send: set contrast 5
Receive: set contrast 5 ok
date
This command reports the current date. The example that follows reports
the date as December 1, 2004.
Send: date
Receive: date 12-01-04
set date mm-dd-yy
mm = month
dd = day
yy = year
This command sets the date of the analyzer’s internal clock. The example
that follows sets the date to March 19, 2005.
Table B-7. Contrast Levels
Level Contrast Level
00%
1 10%
2 20%
3 30%
4 40%
5 50%
6 60%
7 70%
8 80%
9 90%
10 100%
To Next Page
Loading...
