Thermo Scientific NanoDrop One User Guide 139
Measure Custom
Measure using a Custom Method
Use the Custom application to run a user-defined method created using the NanoDrop One
Viewer software running on a personal computer. For more information, see Create Custom
Method.
To load a custom method
Custom methods can only be created on a personal computer running the NanoDrop One
Viewer software. If you want to run a custom method and store the measurement results on
the instrument, the method must also reside on the instrument. (This is the only way to run a
custom method if your instrument is not connected to the computer with an Ethernet cable
or through a wireless network.)
Runs a custom measurement
method created using
NanoDrop One Viewer software.
Measure Custom Method
Delete Custom Method
Reported Results
Note If the computer is connected to the instrument with an Ethernet cable or through a
wireless network, custom methods can reside on the computer and the measurement
results will be stored in that computer’s database. For more information, see “Set Up
Ethernet Connection” or “Set Up Wi-Fi Connections” in Set Up the Instrument.
To Next Page
Loading...
