Thermo Scientific NanoDrop One User Guide 147
Measure UV-Vis
Measure UV-Vis
The UV-Vis application allows the instrument to function as a conventional
spectrophotometer. Sample absorbance is displayed on the screen from 190 nm to 850 nm.
Up to 40 wavelengths can be designated for absorbance monitoring and inclusion in the
report. Automatic pathlength adjustment and a single-point baseline correction can also be
used.
To make UV-Vis measurements
Measures the absorbance of any
sample at up to 40 wavelengths
across the ultra-violet (UV) and
visible regions of the spectrum.
Measure UV-Vis
Reported Results
Settings
Detection Limits
NOTICE
• Do not use a squirt or spray bottle on or near the instrument as liquids will flow into
the instrument and may cause permanent damage.
• Do not use hydrofluoric acid (HF) on the pedestals. Fluoride ions will permanently
damage the quartz fiber optic cables.
To Next Page
Loading...
