Measure Kinetics
158 NanoDrop One User Guide Thermo Scientific
• Best Practices for Cuvette Measurements
• Prepare Samples and Blanks
• Basic Instrument Operations
Create Kinetics Method
Kinetics methods can be created and run only on the NanoDrop One instrument. However,
once the method is created, it can be saved in the NanoDrop One database on the local
instrument, or in the NanoDrop Viewer database on a connected PC. To create a new kinetics
method:
– from Home screen, tap Kinetics tab > Kinetics application
–tap Create Method (the method settings are displayed with Name and Range tab
selected)
–enter Method Name and Description (if desired), select Measurement range and
specify up to three Wavelengths to monitor
To Next Page
Loading...
