Measure Kinetics
Thermo Scientific NanoDrop One User Guide 161
Kinetics Reported Results
Absorbance measurement screen
The absorbance measurement screen appears immediately after you tap Measure in the
kinetics experiment. This screen shows the absorbance spectrum for each measurement, with
wavelength on the X-axis and absorbance on the Y-axis. Vertical lines indicate the specified
wavelengths to monitor. The list at the right shows the time each measurement was taken in
each specified stage (drag the tab down to see more entries). Each item in the list at the right
has a corresponding absorbance spectrum at the left. The image below highlights the available
features.
Tap row to
select
measurement
and update
spectrum; tap
more rows to
overlay up to five
spectra. Press
and hold row to
view
measurement
details.
Drag tab
down/up to see
more/less
sample data
Swipe screen left to view
Rate measurement screen
Pinch and zoom to adjust
axes; double-tap to reset
Tap to end experiment
and export data
Menu of options;
tap to open
Method name User-defined wavelengths
(i.e., 260 nm, 340 nm, 660 nm)
Note For measurements taken with nonstandard (other than 10 mm) cuvettes, the spectra
are normalized to a 10 mm pathlength equivalent.
To Next Page
Loading...
