3
Learning Center
Set Up the Instrument
178 NanoDrop One User Guide Thermo Scientific
• Calculations for Nucleic Acid Measurements
• Calculations for Protein A280 Measurements
Set Up the Instrument
Connect Power
Connect the provided power cord to a grounded wall outlet. Tap h e r e for more information.
Connect an Accessory
To connect a compatible printer or other compatible accessory such as a USB keyboard
and/or mouse to the instrument, use any USB port on the instrument (front, back-left or
back-right). See Accessories for information about accessories compatible with the
NanoDrop One instruments.
Ethernet
Power on/off
Power
USB-A (2)
CAUTION Avoid shock hazard. Each wall outlet used must be equipped with a ground.
The ground must be a noncurrent-carrying wire connected to earth ground at the main
distribution box.
To Next Page
Loading...
