3
Learning Center
NanoDrop One Viewer Software
Thermo Scientific NanoDrop One User Guide 275
Copy Custom Method
To create a custom method that is similar to an existing one, save the existing method with a
new name and then edit the new method.
Copy custom method
– from Manage Custom Methods box, select custom method
– choose Edit
– choose Save As
–enter new Method name and Description (optional)
Run Custom Method
If you want to run a custom method and store the measurement results on the instrument, the
method must also reside on the instrument (see To Load a Custom Method for details). (This
is the only way to run a custom method if your instrument is not connected to the computer
with an Ethernet cable or through a wireless network.)
Export Custom Method
Export a custom method in order to run it and store the measurement results on the
NanoDrop One instrument.
– from Manage Custom Methods box, select custom method
Note If the computer is connected to the instrument with an Ethernet cable or through a
wireless network, custom methods can reside on the computer and the measurement
results will be stored in the NanoDrop One Viewer database on that computer. For more
information, see “Set Up Ethernet Connection” or “Set Up Wi-Fi Connections” in Set Up
the Instrument.
Note If this icon appears next to the method name in the Manage Custom
Methods box, the method is invalid because it contains an error. Hover your
mouse over the icon for suggested solutions.
To Next Page
Loading...
