Safety Information
304 NanoDrop One User Guide Thermo Scientific
The following table lists some of the safety symbols and their indications that may appear in
the user documentation.
Symbols Indication
This is a mandatory action symbol. It is used to indicate that an action
shall be taken to avoid a hazard.
This is a prohibition symbol. The graphic in this symbol is used to alert
the user to actions that shall not be taken or shall be stopped.
This is the general warning sign. Failure to heed the safety precautions
could result in personal injury.
Avoid shock hazard. If you see either of these symbols, there is a risk of
electrical shock in the vicinity. Only qualified persons shall perform the
related procedures.
Avoid fire hazard. Do not test flammable or explosive samples. Read and
follow the associated instructions carefully.
Avoid eye injury. If you see these symbols, there is a risk of exposure to
ultraviolet light, which can harm your eyes if safety glasses are not worn.
Avoid Biohazard. This icon informs of a biological hazard in the area.
Read and follow the associated instructions carefully.
Avoid chemical burns. This symbol alerts you to possible skin irritation.
Wear gloves when handling toxic, carcinogenic, mutagenic, or corrosive
or irritant chemicals. Use approved containers and proper procedures to
dispose of waste.
Symbol Description
Alternating current
Earth terminal or ground
Direct current
Protective conductor terminal
Frame or chassis terminal
Fuse
Power on
Power off
To Next Page
Loading...
