III-3
Orion Star Series Meter
Thermo Electron Corporation
Keypad
Icon Definitions
Key Description Key Description
• Turns meter on, if shut off.
• Toggles backlight on & off, if meter
is on.
• If meter is on, holding down
will turn off the meter.
• Changes measurement mode of the
selected line.
• Changes selected line in Setup,
Methods & Log View.
• Edits the value of the flashing digit
for Setup, Password entry, and
Calibration.
Switches arrow on left of the screen
between 3 display lines to select and
edit.
Changes selected digit to edit and moves
decimal point when changing values in
Setup, Password entry, & Calibration.
Starts calibration for currently selected
line and measurement mode.
• If arrow is pointed to the top line
and the current units are pH,
will start a pH calibration.
• Each time is pressed in the
calibration it will accept the current
point value and move to the next
cal pt until the max # of cal pts are
performed, then it will return to
measurement mode.
• Print & Log a measurement in
continuous or timed measurement
mode.
• Prints, Logs, & Freezes screen when
the reading becomes stable.
• Exits SETUP and returns to
measurement mode.
• Accepts Cal pt and returns to
measurement mode.
Enters SETUP menu starting with
selected line and measurement mode:
If arrow is pointed to top line and
current units are ISE, then will
enter the ISE setup screen.
Enters LOG View & Download Screens.
Turns stirrer on & off.
To Next Page
Loading...
