Thermo Electron CorporationV-2 Orion Star Series Meter
Menu Setup
General Menu Settings
The following table describes general instrument setup.
Description Display Range of Values Default
Value
Method
Specific
Manual Temperature
Compensation Setting
gEn
dEgC
25.0
-5.0 - 105 25.0
Yes
Stirrer Speed Setting
(Benchtop only)
gEn
StIr
4
OFF, 1, 2, 3, 4, 5, 6, 7 4
Yes
Auto-Shut Off Selection gEn
AUtO
On
OFF, On On
Yes
•
Manual Temperature setting controls temperature compensation when no
temperature sensors are attached to the instrument.
•
Stirrer Speed Setting (benchtop meters only) sets the speed from 1 through
7 with speed 1 being the slowest and 7 being the fastest. A speed of 3 or 4 is
recommended for most applications.
•
Auto-Shut Off is the default which automatically turns off the instrument after
20 minutes elapse without a key press. To override this feature, select “Off” and
the instrument will continue to operate.
To Next Page
Loading...
