Thermo Orion Star - Getting Started with GLP Methods

Thermo Electron CorporationV-8 Orion Star Series Meter
Menu Setup
Getting Started with GLP Methods
The following table describes in greater detail the abbreviations shown on the
display screen.
Description Display Range of Values Default
Value
Method
Specific
Enable or Disable Methods
“Setting”
gLP
SEt
On
OFF, On
When on will allow storing
And using 10 stored Methods
OFF
No
Enable & Set Instrument
Password
gLP
PASS
0000
0000 - 9999
Sets the Setup/Method
Password; 0000 disables
passwords
0000
No
Method Selection
1. In the measurement mode press .
2. Press
/ to scroll through setup menu until is
displayed on the top line.
3. Press
to accept the selection and move the arrow icon
to the middle line.
4. Press
/ to scroll until is displayed.
5. Press
to accept the selection and move arrow icon to
the bottom line.
6. Press
/ to edit the value to .
7. Press
to accept the selection and move arrow icon to
the top line.