Thermo Orion Star - Page 28

Thermo Electron CorporationV-10 Orion Star Series Meter
Menu Setup
Password Selection
Each method can be password protected to prevent unauthorized individuals from
changing the setup options.
As a default setting, all Orion Star Series meters are shipped with the Password set
to . Retaining this setting allows unlimited access by any user.
To set the Password protection feature:
1. In measurement mode press
.
2. Press
/ to scroll through the setup menu until
is displayed on the top line.
3. Press
to accept the selection and move arrow icon to
the middle line.
4. Press
/ to scroll until is displayed.
5. Press
to accept the selection and move the arrow icon
to the bottom line.
6. Press / and to enter the password.
7. Press to accept the selection and return the arrow icon
to the top line.
8. Press to return to the measurement mode display.
When is pressed the password entry screen will appear
and the user must enter the password to proceed into the
setup menu.