V-11
Orion Star Series Meter
Thermo Electron Corporation
Menu Setup
Selecting Measurement Modes
In the measurement mode the arrow icon on the left side of the display screen
indicates which mode is selected. Use / to scroll through the various
modes associated with a selected line. Use to move the arrow icon to the next
line, and then toggle / to scroll through the modes associated with the
selected line.
pH
mV
Rel mV
ISE
Off
μS/cm or mS/cm for conductivity
mg/L for TDS
ppt for Salinity
MΩ-cm for resistivity
Off
%Sat for DO percent saturation
mg/L for DO concentration
Barometric Pressure
Off
For setup information related to specific techniques, refer to Chapter 7 through
Chapter 11 of this manual.
To Next Page
Loading...
