Serial Communications 3104
REC XXXXX 3-4
-DIAGNOST. SCROLL 7-
Date: DD-MM-YYYY
DAY: DD
ENTER
-DIAGNOST. SCROLL 8-
Time: HH:MM
HOURS: HH
ENTER AM/PM
- DISPLAY SCROLL 7 -
Time
> 24 h<
CHOICE ENTER
3.4.1 Clock/Calendar Set-Up
When an COMM A board is installed, date and time become available and
must be set. The battery, located on the mother board, provides backup for
the perpetual calendar/clock. Time and date needs to be set only once.
1. Press the MENU key until Main Menu 3 appears. Press the soft key
under the DIAGNOSTICS scroll and scroll down until -DIAGNOST
SCROLL 7- appears.
The following scroll is provided to set up the date, and enter the day,
month and year in sequence.
Password : SERVICE
Default: 00-00-0000
Min: 01-01-0000
Max: 12-31-2096
Time is entered in a similar way. The AM/PM key is used when time is in
the English mode (see Display Scroll 7 below).
Password: SERVICE
24 hour am/pm
Default: 00:00 01:00
Min: 00:00 01:00
Max: 23:59 12:59
2. Press the MENU key until Main Menu 2 appears. Press soft key under
DISPLAY scroll and scroll down until -DISPLAY SCROLL 7- appears.
The user can define the format for displaying and printing time and date. Select
the 24 hours or 12 hours format:
Password: Service
If USA or English: Default: am/pm
If other language: Default: 24 h
Selections: am/pm, 24 h
To Next Page
Loading...