Thermo Ramsey Micro-Tech 3000 Series - Page 33

Serial Communications 3104
REC XXXXX 3-13
- PRINTER SCROLL 12 -
Date position
X = --- , Y = ---
ENTER X\Y-pos
- PRINTER SCROLL 14 -
Reset total pos.
X = --- Y = ---
ENTER X\Y-pos
- PRINTER SCROLL 15 -
Master total pos.
X = Y = ---
ENTER X\Y-pos
- PRINTER SCROLL 16 -
Weight position
X = - Y = ---- -
ENTER X\Y-pos
- PRINTER SCROLL 13 -
Time position
X = --- , Y = ---
ENTER X\Y-pos
A series of variables can be added in the report. Variable are : MASTER TOTAL, RESET TOTAL, DATE,
TIME, WEIGHT and RATE. The position must be defined for each variable. If you do not intend to add a
variable in the report, you should set its X position to 0.
Password: Operator
X Y
Default: 4, 1
Min: 0, 1
Max: 24, 80
Password: Operator
X Y
Default: 5, 1
Min: 0, 1
Max: 24, 80
Password: Operator
X Y
Default: 6, 1
Min: 0, 1
Max: 24, 80
Password: Operator
X Y
Default: 7, 1
Min: 0, 1
Max: 24, 80
Password: Operator
X Y
Default: 0, 1
Min: 0, 1
Max: 24, 80