Need help?Do you have a question about the ThermoFisher Scientific Thermo Scientific iCE 3300 and is the answer not in the manual?
General| Type | Atomic Absorption Spectrometer |
|---|---|
| Wavelength Range | 190 - 900 nm |
| Detector | Solid-state detector |
| Flame AAS | Yes |
| Optical System | Double Beam |
| Power Requirements | 100-240 V, 50/60 Hz |
| Detection Limit | Varies depending on element |
| Light Source | Hollow Cathode Lamps (HCL) or Electrodeless Discharge Lamps (EDL) |
| Sample Introduction | Flame, Graphite Furnace, Hydride Generation |
| Data Acquisition | Digital |
| Burner | Titanium burner head |
| Graphite Furnace AAS | Optional |
| Hydride AAS | Optional |
| Background Correction | Deuterium |
| Dimensions | 850 x 600 x 600 mm |
Specifies the physical placement and spatial considerations for the instrument.
Defines the acceptable atmospheric temperature, humidity, and pressure conditions.
Outlines the necessary power supply voltage, frequency, and connection specifications.
Details the types, purity, pressure, and flow rates of gases required for operation.
Specifies requirements for a recirculating chiller for waste heat removal.
Describes the safe handling and containment of waste produced during analysis.
To Next Page
