ThermoFlow Ut5 User Manual

manual storage ut5 2022 12 v.3. i n d d
18
2022/12/26 下午4:18
10
Error
Explanation
Solution
The indicator light does not
come on
No voltage
Check the fuse and the socket
The appliance has reached the
set temperature.
No need to do anything
Water temperature not as
required
Thermostat incorrectly set
Change the setting of the thermostat
Too little / no water
Water pressure too low
Check if other cold water taps have the
same problem
Shut-off valve not fully open
Open shut-off valve
No water
The unit should be turned off as
soon as possible! See also "The unit
does not work".
Water lies under the unit
The unit is leaking
Notify the sales office
Water pipes are not firmly
connected to the appliance
Check the water connections
Tap drops when heating up
This is normal because of the
expansion of the heated water.
No need to do anything
Bubbling noises in the tank
Too much calcification
The appliance must be decalcified
by a specialist .
The residual current circuit
breaker is tripped
Too many devices in the safety
group
Remove some units from the group
or search for an empty group
The unit does not work at all
If the appliance no longer works, check whether the fuse or the
residual current circuit breaker has tripped. For your safety, the hot
water tank is equipped with a maximum temperature switch. The
appliance switches off automatically if there is excessive heating. In
this case, switch off the appliance for a few minutes by unplugging the
mains plug from the socket and allow the appliance to cool down. After
approx. 20 minutes, the appliance can be reconnected to the mains .

ThermoFlow Ut5 Specifications

General

Brand	ThermoFlow
Model	Ut5
Category	Boiler
Language	English