To Next Page
K
Kimberly MeyersAug 2, 2025
What to do if Thermomedics Caregiver PRO TF-300 shows a very low battery?
- AandrewszacharyAug 2, 2025
If your Thermomedics Thermometer indicates a very low battery, replace the batteries before using it again.
What to do if Thermomedics Caregiver PRO TF-300 shows a very low battery?
If your Thermomedics Thermometer indicates a very low battery, replace the batteries before using it again.
What to do if Thermomedics Caregiver PRO TF-300 shows sensor error or unstable ambient temperature?
If your Thermomedics Thermometer displays a sensor error or indicates an unstable ambient temperature, allow the device to adjust to the current room temperature for 20 minutes. If the error continues, further assistance may be needed.
What to do if the ambient temperature is too high for Thermomedics Caregiver PRO TF-300 Thermometer?
If the ambient temperature is too high for your Thermomedics Thermometer, allow the device to cool down to a temperature below 104°F (40°C).
What to do if Thermomedics Caregiver PRO TF-300 shows body mode temperature above 1080F (42.20C)?
If your Thermomedics Thermometer displays a body mode temperature above 108°F (42.2°C), repeat the temperature measurement. If the high temperature persists, the thermometer's ambient temperature may be outside acceptable limits; allow it to cool for 20 minutes.
General| Brand | Thermomedics |
|---|---|
| Model | Caregiver PRO TF-300 |
| Category | Thermometer |
| Language | English |
General introduction to the Caregiver Non-Contact Thermometer and its features.
Specifies the intended purpose and application of the thermometer for medical and consumer use.
Crucial safety guidelines and warnings for using the thermometer properly.
Step-by-step guide for installing batteries and preparing the device for operation.
Details on measuring human body temperature and understanding fever.
Instructions on how to access and view previously stored temperature readings.
Procedure to switch between Fahrenheit and Celsius temperature units.
Explanation of how to use the thermometer for surface and room temperature readings.
Guide to setting the device's date and time for accurate logging.
Instructions for cleaning and maintaining the thermometer for optimal performance.
Explanation of error codes and suggested solutions for device issues.
Information on calibration adjustment, intended for qualified technicians.
Technical details and performance specifications of the thermometer.
Details regarding the product warranty and return procedures.
Step-by-step guide for performing accurate body temperature measurements.
