2. Press the motor unit release button and move it to the position indi-
cated in the product description diagram above.
3. Set the bowl on its base. To tighten and lock in position, hold the turnta-
ble base and turn the bowl clockwise until locked. Once the device has
been switched off and unplugged, hold the turntable base and turn the
bowl counterclockwise to unlock the bowl and remove it.
4. Insert the dough hooks or whisks as shown in the image above.
The hooks and whisks display the letters ‘L’ and ‘R’ for correct
placement. The unit itself has the ‘L’ and ‘R’ noted on the under-
neath of the motor head next to the holes. With the product facing
EJECT BUTTON TO
REMOVE WHISKS
FIGURE A
12
To Next Page
Loading...