TI120 Series Variable Frequency Drive Detailed parameter introduction
The number of pole pairs of
resolver
P62 Motor characteristics parameter
Stator resistance of
asynchronous motor
Factory default:
Model determination
Rotor resistance of
asynchronous motor
Factory default:
Model determination
Leakage inductance of
asynchronous motor
Factory default:
Model determination
Mutual inductance of
asynchronous motor
Factory default:
Model determination
No-load current of
asynchronous motor
Factory default:
Model determination
Saturation coefficient of
asynchronous motor
Factory default:
Model determination
The above group of parameters is characteristic parameters of asynchronous motors, which are
automatically defaulted as Factory default according to the power. The characteristic parameters of the
actual motor can be automatically obtained by static or rotating identification of the motor, or can be
provided by the motor manufacturer.
Stator resistance of
synchronous motor
Factory default:
Model determination
D-axis inductance of
synchronous motor
Factory default:
Model determination
Q-axis inductance of
synchronous motor
Factory default:
Model determination
Counter electromotive force of
synchronous motor
Factory default:
Model determination
The above group of parameters is characteristic parameters of synchronous motors, which are
automatically defaulted as Factory default according to the power. The characteristic parameters of the
actual motor can be automatically obtained by static or rotating identification of the motor, or can be
provided by the motor manufacturer.
P63Motor nameplate parameters
To Next Page