Pairing Steps:
Pairing with Third Reality Hub
Compatible Devices: Third Reality Smart Hub
App: Third Reality App
Open the back cover of your Water Leak Sensor with a screw-
driver, insert two AAA batteries, if the blue light is not blinking
rapidly, please press the button for about 3s, when the read
light is on, release the button, the blue light will blink rapidly
indicating that it is in pairing mode.
1.
Open Third Reality App, go to device page, tap “+” belongs to
the Hub, choose “Water Leak Sensor”, then click “pair”.
2.
After the pairing is successful, tap “Complete”, then back to
main interface.
3.
Tap “Water Leak Sensor” icon on device page, you can see the
details, such as Battery, History Records and etc.
4.
Tap “Push Notification” so that when there is any water leak
detected, you will receive App notifications.
5.
To Next Page
Loading...