Need help?Do you have a question about the THK LM Guide and is the answer not in the manual?
General| Type | Linear Motion Guide |
|---|---|
| Load Capacity | Varies by model (e.g., 5.8 kN to 200 kN) |
| Accuracy | Varies by grade (e.g., Normal, High, Precision) |
| Application | Machine tools, industrial robots |
| Seal Type | Scraper |
| Operating Temperature | -20°C to +80°C (Standard) |
| Lubrication | Grease or Oil |
| Mounting Method | Bolt-On |
| Model Number | Varies by series (e.g., SR, SRS, SHS, etc.) |
Opening remarks expressing gratitude for purchasing the THK LM Guide and outlining the manual's scope.
Details the intended audience, how to use the manual, and important notices regarding product information and updates.
Defines the permissible applications and advises consultation with THK for specialized or life-critical uses.
Information on contacting THK for support and to notify them of any concerns regarding product accuracy.
Provides website URLs for the latest product information and technical support from THK.
Explains the meaning of warning, caution, and prohibition symbols used throughout the manual to ensure safety.
Guidelines for safe handling, including lifting, avoiding disassembly, and preventing falling objects or jamming.
Advises on preventing foreign material damage, proper lubrication, and handling temperature extremes.
Details on lubrication requirements, including avoiding mixing lubricants, using appropriate types, and ensuring proper application.
Instructions for storing LM Guides horizontally in their original packaging under controlled indoor conditions.
Guidance on disposing of the product appropriately as industrial waste.
Explains serial number markings on LM rails and blocks, ensuring they match for combined use.
Describes markings on the reference surface of LM Guides and their role in positioning and orientation.
Emphasizes using LM rails and blocks with identical serial numbers for correct assembly and operation.
Instructions for connecting multiple LM rails for longer lengths, ensuring correct joint positioning and alignment.
Detailed steps for mounting LM rails and LM blocks, including surface preparation and tightening sequences.
Guidance on measuring running accuracy for single rail applications using an auto-collimator or dial gauge.
Provides tables with recommended tightening torque values for various screw sizes for LM rails.
Information on using a specialized jig for safe and accurate removal or mounting of LM blocks.
Discusses parallelism error allowances between two rails and their impact on LM Guide service life.
Explains vertical level error allowances between two rails, proportionate to axis-to-axis distance.
Recommends greasing intervals based on travel distance or time, and lists recommended grease types.
Details methods for supplying lubricant, including manual greasing, forced greasing, and oil lubrication.
To Next Page
