thomann Botex NETcon 8-3 - Page 27

If you need to resolve a MAC conict by changing the MAC address, follow these steps:
1. In the ‘Info’ menu, call up the submenu ‘Version’ , press [Down] twice and then [Setup] to
open the password menu.
2. Change the password with [Up] | [Down] to ‘254’ and press [Setup] to open the menu for
changing the MAC address.
3. Change 6 consecutive bytes, press [Setup] to change the next one, save all changes and
go with [Back] back to the main menu.
Operating
NETcon 8-3 / 8-5
27
ArtNet DMX converter