Need help?Do you have a question about the thomann harley Benton FXL8 Pro and is the answer not in the manual?
General| Number of Effects/Loops | 8 |
|---|---|
| Switching Type | Footswitch |
| USB | Yes |
| Display | LCD |
| Type | Multi-FX Pedal |
| Inputs | 1 x 1/4" (instrument) |
| Outputs | 2 x 1/4" (L/Mono, R) |
| Power Supply | 9V DC |
Details on where to find additional product information and support resources.
Explains the specific formatting and symbols used throughout the manual for clarity.
Defines the meaning of warning symbols and signal words to ensure user safety.
Outlines the proper application of the device and fundamental safety guidelines.
Highlights critical safety warnings regarding children, operating environment, and potential hazards.
Provides essential safety instructions for connecting and using the external power supply unit.
Details the setup for 8-channel mode when utilizing the MIDI output for external control.
Explains the installation procedure for 8-channel mode without external MIDI synchronization.
Describes the connection and setup for the 2x4-channel operating mode.
Identifies and explains the function of controls located on the top panel of the device.
Illustrates and describes the input/output jacks and connectors found on the rear panel.
Instructions for using the tuner, mute function, and navigating memory banks.
Guide on accessing and utilizing the device's comprehensive edit and programming features.
Steps for configuring and assigning effects to specific loop channels within the device.
How to set the polarity for the programmable trigger outputs (T1 and T2).
How to configure the operating mode (momentary or latch) for the trigger outputs.
Defines how triggers function when effect channels are active (non-bypass).
Defines how triggers function when effect channels are inactive (bypass).
Introduction to the device's MIDI capabilities and data transmission settings.
Configuration details for MIDI messages sent during patch transitions from non-active to active.
Configuration details for MIDI messages sent during patch transitions from active to non-active.
Explains the differences between balanced and unbalanced signal transmission methods.
Guidelines for the environmentally responsible disposal of product packaging and the old device.
To Next Page