thomann SP-320 Stand - User Manual

To Next Page

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de

DocID: 399665_08.12.16

SP-320 Stand

Assembly instructions

For mounting the SP-320 stand, use the

supplied furniture locks M6 (A), cap screws (B),

plastic caps (C) and hand screws (D).

Use a soft padding to prevent damages to

the surfaces.

1. Place the furniture locks (A) into the provided

blind holes in the cross bar. Make sure that the

furniture locks are positioned so that the

connecting screws can be inserted and fastened.

2. Place the cap screws (B) into the provided blind

holes of the side panels.

Scope of delivery

A: 4 × furniture lock M6

B: 4 × cap screw M6×40

D: 4 × hand screws M5×25

C: 8 × plastic caps

Crossbar

Left and right side panel

Need help?

Do you have a question about the thomann SP-320 Stand and is the answer not in the manual?

thomann SP-320 Stand Specifications

General