What to do if my thomann Fog Machine has no fog output?
If your thomann Fog Machine isn't producing fog, here's what you can check: 1. Make sure there's enough fluid in the fog container. 2. Turn off the device and inspect the hose leading to the fluid container to ensure it's not blocked. 3. See the ‘Dry-run protection’ section on page 20 to check if the protective circuit has tripped and needs resetting.
Why my thomann Fog Machine is not responding to the DMX controller?
If your thomann Fog Machine is not responding to the DMX controller, here are a few things you can check: 1. Verify that the DMX connectors and cables are properly connected. 2. Check the DMX address settings and polarity. 3. Try using a different DMX controller. 4. Ensure that the DMX cables are not running near high voltage cables, as this can cause interference.
General| Power Consumption | 1000 W |
|---|---|
| Tank Capacity | 1.5 l |
| Control | DMX, Manual |
| Control Type | DMX, Manual |
| Remote control cable length | 3 m |
| Power supply | AC 230 V, 50 Hz |
| Operating voltage | 230V, 50Hz |
Covers risks for children, including choking hazards from small parts and packaging.
Details dangers of electric shock from internal high voltages and mains cable modification.
Warns about burns from flammable liquids and the hot fog nozzle during and after operation.
Addresses risks of slipping due to condensate and health hazards from fog fluid.
Covers potential respiratory problems from unsuitable fluids and fire risks from blocking ventilation.
Emphasizes checking voltage compatibility and using correct fuses for safety.
Provides essential rules for safe operation, including supervision, placement, and distances.
Covers placement on flat surfaces, tilt limits, and clearance requirements.
Explains how to set the DMX address using DIP switches.
Provides solutions for common problems like unit not working or no fog output.
To Next Page
