How to use: Beater, balloon w hisk, Kneading hook
1
Before first using, please clean the
equipment with soap and water and wait
for completely dry.
1.1
Rotate the handle to vertical direction in ord
er rise the motor head.
2
Assembling the bowl filled with powder
into base flute clockwise.
3
Assembling the bowl cover into arm
clockwise.
4
According to your desire, assembly beater,
balloon whisk, kneading hook into rotating
axis then revolve them clockwise (As
pict ure shown).
5.
Press arm down to the position as picture
shown.
Power on.
Set switch to the appropriate speed
6
After food is ready, set the control panel to
“OFF” then unplug. Turn the knob
clockwise and set arm up to position as
pict ure shown
7
Remove beater, balloon Whisk kneading
hook Counter-clockwise.
GB-5
To Next Page
Loading...