DESCRIPTION:
Ventilateur - Chauffage
soufflant 2 en 1 TWIN
Heater low power
CLASS II
This product conforms to the requirements set by directives 2014/35/EC (repealing directive 73/23/EEC
amended by directive 93/68/EEC) and 2014/30/EC (repealing directive 89/336/EEC)
USING THE HEATER:
Do not use this heater in a bathroom
1. Before using this appliance, ensure that it is placed on a flat, stable surface.
This appliance is equipped with an anti-tripping switch that switches the appliance off in
the event that it tips over and is not placed on a stable surface.
2. Check that the voltage corresponds to that of the power supply (230v mains socket)
Once the appliance is plugged in, a bip sounds and indicator lights on.
This unit has 2 operating modes, fan heater and fan (cold air)
When the device is switched on, it starts automatically in heating mode.
Press the button On/ Standby to switch on the heater on high power .
The heater works on the high power.
Press the button mode to select successively the desired mode : Fan low speed
Fan high speed Heater low power Heater high power.
To Next Page
Loading...
