TECHNICAL SPECIFICATIONS
LED ceramic tower fan heater
CLASS II
This product conforms to the requirements set by directives 2014/35/EC (repealing
directive 73/23/EEC amended by directive 93/68/EEC) and 2014/30/EC (repealing
directive 89/336/EEC)
COMPOSITION:
1 - Control panel 8 - Button On / Off
2 - Front grill hot air outlet 9 - Button power I and II
3 - Base 10 - Button timer
4 - Handle 11 - Button oscillation
5 - Grill air inlet 12 - Button decrease
6 - Power switch 13 - Button increase
7 - Tip over switch 14 – Temperature / timer display
INSTALLATION:
Before using this appliance, ensure that it is placed on a flat, stable surface.
This appliance is equipped with an anti-tripping switch that switches the appliance off in
the event that it tips over and is not placed on a stable surface.
Do not overload the electrical circuit. Avoid using the same socket for other appliance.
Before plugin the appliance into the mains socket, check that the main power supply
corresponds to the value indicated on the rating label and that the mains power supply is
adequate for the load.
GB-6
To Next Page
Loading...
