EasyManua.ls Logo

Thor Broadcast H-HDMI-RF-PETIT Quick Setup Guide

Thor Broadcast H-HDMI-RF-PETIT
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Step 1: CONNECT POWER
Connect the DC 12V
power adapter
H-HDMI-RF-PETIT
Quick Setup Guide
800-521-8467 https://thorbroadcast.com sales@thorfiber.com
"POWER" LED will go GREEN
"ENCODING" LED will go GREEN
when the unit is ready for input
The “LINK LOCK” indicator MUST go GREEN. If not, check troubleshooting steps.
Please note that the unit supports 480i, 720p, 1080i and 1080p
59.94 and 60Hz incoming video resolution.
Make sure your video source is set to the STATIC VIDEO RESOLUTION for any of those
formats. Do not set your video source resolution "Auto".
Connect “HDMI IN” to input
from an HDMI source
Connect “RF IN” to input
from an RF source
After the boot-up sequence the front Digital display will
show C002 indicating default modulation channel #2
When the unit recognizes
the correct Video resolution,
the "LINK LOCK" LED will
go GREEN.
Step 2: CONNECT VIDEO SOURCE

Other manuals for Thor Broadcast H-HDMI-RF-PETIT

Question and Answer IconNeed help?

Do you have a question about the Thor Broadcast H-HDMI-RF-PETIT and is the answer not in the manual?

Thor Broadcast H-HDMI-RF-PETIT Specifications

General IconGeneral
BrandThor Broadcast
ModelH-HDMI-RF-PETIT
CategoryModulator
LanguageEnglish