Thought Technology Ltd. Procomp Infiniti - Page 43

Voltage Isolator (SA9405)
Size (Approx.) 95mm x 57mm x 32mm (3.75” x 2.25” x 1.25”)
Weight 55g (2 oz)
Input Impedance 1MΩ
Input Range 0 – 200mV, 0 – 2V, 1.952V – 3.648V
Bandwidth 0Hz – 40Hz
Accuracy ±5% and ±1mV (0 – 200mV range)
±5% and ±10mV (0 – 2V range)
±5% (1.952V – 3.648V range)
Skin Conductance Flex/Pro Sensor (SA9309M)
Size without electrode
leads (approx.)
3.5 cm (1.4”)
Size with electrode leads
(approx.)
15 cm (6.0”)
Cable Length (approx.) 127 cm (50”)
Weight (approx.) 25 g (1 oz)
Signal Input Range 0 – 30.0 μS
Accuracy ±5% and ±0.2 μS
Goniometer Adapter Hardware Specifications
Size (approx.) 370mm x 370mm x 100mm (1.45” x 1.45” x 0.44”)
Weight (approx.) 15g (0.5 oz)
Input Impedance >1MΩ
Signal Input Range -180° -+ 180° (±5 degrees of movement)
Signal Output Range 2.200 – 3.400V
Supply Voltage 7.26 VDC
Current Consumption <4mA @ 7.26 VDC
Accuracy ±5%
Force Sensor Adapter Hardware Specification
Sensor Resistive Range
: 1KΩ - 1.4MΩ (native Infiniti modes)
Output Voltage Transfer Function
: V
out
= [301KΩ/(R
fs
+575KΩ)] * V
s
where R
fs
is the resistance of force sensor in KΩ
Supply Voltage : (V
s
) = 7.26V
Current Consumption
: < 1mA @ 7.26V nominal
Resistance to Voltage Accuracy
: ± 1%
Length : ~152cm (60”)
Weight : ~10g
43