To Next PageTo Next Page
Need help?Do you have a question about the Thrush Aircraft S2RHG-T65 TURBO THRUSH and is the answer not in the manual?
General| Brand | Thrush Aircraft |
|---|---|
| Model | S2RHG-T65 TURBO THRUSH |
| Category | Aircrafts |
| Language | English |
Provides an overview of the Turbo Thrush aircraft's design and purpose.
Details the construction of the aircraft's airframe components including fuselage, wing, empennage, and cockpit.
Covers major aircraft systems such as hydraulics, powerplant, fuel, landing gear, flight controls, instruments, and electrical systems.
Procedures for ground operations including towing, taxiing, parking, and mooring.
Specific practices and procedures for operating the aircraft in cold weather.
Steps to take in case of engine fires or electrical fires on the ground.
Procedures for engine operation on the ground, including pre-start checks and starting sequences.
Maintenance actions for various aircraft systems like engine oil and fuel systems.
Guidelines for routine inspections, including check lists and inspection charts.
Details on the aircraft's hydraulic systems, including general description and operation.
Covers powerplant general description, operation, buildup, and removal procedures.
Procedures for installing the engine unit into the aircraft.
Details on propeller operation, beta feedback mechanism, and constant speed unit.
Instructions for propeller removal and installation procedures.
Guidelines for rigging airframe control linkages and specific linkages like front and rear.
Functional checks and adjustments for engine controls after rigging.
Provides general description, maintenance precautions, and components of the fuel system.
Details on fuel quantity indicating system, auxiliary electric fuel pump, and fuel filter.
Information on sealing compounds for fuel system repairs and maintenance.
Provides a troubleshooting chart for common fuel system problems and their remedies.
Covers removal and servicing procedures for the main landing gear.
Details on the removal, inspection, and repair of the tail landing gear assembly.
Information on main wheel removal, inspection, reassembly, and brake servicing.
Procedures for measuring brake lining wear and conditioning metallic and organic linings.
Step-by-step instructions for removing and disassembling brake components.
Procedure for bleeding the aircraft's brake hydraulic systems.
Lists common landing gear problems, probable causes, and recommended remedies.
General description of flight controls and maintenance procedures.
Details on control stick, ailerons, wing flaps, rudder, and elevators.
Procedures for aileron removal, installation, and rigging.
Instructions for flap jackscrew removal, flap removal, installation, and rigging.
Covers rudder removal, installation, pedal removal, and rigging procedures.
Details on elevator balance springs, removal, installation, and rigging.
Procedures for wing removal and installation.
Troubleshooting guide for aileron, flap, rudder, and elevator systems.
General description of cockpit instruments and system maintenance.
Guidelines for maintaining instrument systems, including inspection and leakage tests.
Details on flight instruments like magnetic compass, airspeed indicator, and altimeter.
Information on the magnetic compass, including compensation procedures.
Covers instruments related to the powerplant, such as oil pressure and fuel gauges.
Details on instruments like fuel quantity indicator and hopper quantity.
Troubleshooting guide for common instrument problems like airspeed indicator and altimeter issues.
General description of dispersal systems, including the hopper and spray booms.
Information on hopper care and repair procedures.
Maintenance recommendations for dispersal equipment like the hopper gatebox and spreader.
Inspection guidelines for the agitator and spreader components.
Overview of the aircraft's 24-volt DC electrical system, including description and power distribution.
Details on battery servicing, operation, removal, and installation.
Explanation of the generator system, including its components and operation.
Information on voltage regulator removal and installation procedures.
Procedures for starter-generator removal and installation.
Troubleshooting guide for battery and starter/generator systems.
Includes system schematics for various electrical components.
Lists life-limited parts and replacement requirements based on flight hours.
Details life limits for structural components like spar cap assemblies.
Specifies annual inspection requirements for structural parts like spar splice blocks.
