5) Click OK (in the lower right part of your screen).
6) Return to the main menu to access the track of your choice.
You are now ready to play!
Note: The steering wheel on your "Ferrari Racing Wheel: Red Legend edition" racing wheel features 2
sensitivity modes (normal or high). To achieve optimal precision in "Gran Turismo® PS3™", we
recommend that you enable "high sensitivity" mode.
PC
Installation on PC
1. Set the wheel’s USB selector (7) to the “PC” position.
2. Go to http://ts.thrustmaster.com/ to download the drivers and advanced programming software for PC
(select PC / Wheels / Ferrari RW Red Legend, and then select Drivers).
3. Connect the USB connector (13) to one of your computer’s USB ports. Windows® will automatically
detect the new device.
4. Driver installation
Drivers are installed automatically. Follow the on-screen instructions to complete the installation.
5. Click Start/Settings/Control Panel and then double-click Game Controllers (or Gaming Options,
depending on your operating system).
The Game Controllers dialog box displays the wheel’s name with OK status.
6. In the Control Panel, click Properties to configure your wheel:
• Test device: Allows you to test and visualize the buttons, D-pad and axes of the wheel and pedal
set.
You are now ready to play!
IMPORTANT NOTES ON PC
- The wheel’s USB selector (7) must always be set to the “PC” position before connecting your wheel.
- Your wheel and pedals automatically self-calibrate upon connection of the USB connector. In the event
of any problems, you can also carry out manual calibration by downloading the “Thrustmaster
Calibration Tool” software, available at the following address:
http://ts.thrustmaster.com
To Next Page
Loading...
Need help?
General
