Thule Chariot Chinook 1 - Installing the Wheels; Removing the Wheels

10
51100968 - B
3.4 InStAllInG thE WhEElS 3.5 rEmovInG thE WhEElS
A. Press and hold the wheel release button on the wheel.
(See Image 1)
B. Insert the wheel axle into the carrier axle.
C. Release the wheel release button.
D. Press the wheel fully into the carrier axle.
E. Verifythatthewheelissecurelyattachedtothecarrier
by giving it a sharp pull.
F. Repeat for the other wheel.
G. Using a tire pressure gauge check the air pressure in
each tire. The minimum recommended tire pressure is
30 psi (2.1 bar) and the maximum is 35 psi (2.5 bar).If
airpressureistoolowineitheroneofthetiresllthem
up using a bicycle tire pump.
A. Press and hold the wheel release button on a wheel.
(See Image 2)
B. Pull the wheel out of the carrier axle.
C. Repeat for the other wheel.
1 2
WARNING
Before each journey make sure that
both of the wheels are securely locked
in the carrier axle.