Need help?Do you have a question about the Thule K-Summit and is the answer not in the manual?
General| Weight | Varies by model |
|---|---|
| Type | External snow chain |
| Category | Snow Chains |
| Features | Innovative ratchet system |
| Tensioning system | Ratchet system |
| Certifications | TÜV |
| Chain link size | Not applicable |
Ensure vehicle nut caps are removed and wheel areas are clean before installation.
Verify the pre-mounted lug nut adapter fits the vehicle's wheel lug nut.
Verify the pre-mounted spacer fits the vehicle's wheel correctly.
Select and remove regulation elements based on tyre size and chain model.
Keep removed elements to restore original chain dimensions when needed.
Open chain arms, position upper arms on tyre, and join lower arms.
Verify the pre-mounted spacer fits the vehicle's wheel correctly.
Ensure the tightening mechanism's red arrow points towards the wheel center.
Complete the chain fastening process by tightening the mechanism.
The K-Summit chain self-positions on the tyre while driving.
Release the chain locking mechanism by turning the lever 180 degrees.
Follow steps to detach the chain from the wheel and vehicle.
Drive carefully, avoid sudden maneuvers, and do not exceed 50 km/h.
Clean chains in hot water, dry thoroughly, and check for wear.
To Next Page
