SPY PEN CAMERA - 2 - Thumbs Up (UK) Ltd
If you want to start recording when in standby mode press the switch again. After
approximately two seconds the yellow light will turn blue to indicate that recording
has started again.
You can continue to do this until you switch the power off. Video files will
automatically be saved to memory.
Shutting Down:
When the camera is in standby mode, it will shut down automatically after 15
seconds if the switch is not pressed.
When you are recording, you can shut it down by pressing and holding the switch
for 2 seconds, until the blue light turns off. Video files will then be automatically
saved and the pen will switch off.
Playback:
Connect the pen to the USB port of a computer. It will display in ‘My Computer’ as
an external removable disk drive.
Open the folder ‘Movie/Record’. Video files will be saved in this folder. Click on
these, or select your computer’s video playback software to play these.
You may need a codec file to display these correctly. The CD driver disk that comes
with your Spy Pen Camcorder includes an activex file called ‘ffdshow’ that you can
install on your PC to play videos in Windows Media Player.
Alternatively we recommend that you download video playback software such as
‘VLC’ from the Internet, which can also play video files saved by your Spy Pen
Camcorder.
Charging:
If the yellow light is continually on when you are using the pen, this means that it
requires charging.
Press and hold the switch for 2 seconds to shut it down. The pen has a standard USB
interface, so that you can connect it to a computer to charge.
When you charge the pen by connecting it to a computer, the yellow light
displaying continuously means that it is charging. When this switches off,
charging is complete.
Time Stamp Setting:
Video files made by this pen camcorder will include a timestamp watermark.
This will need setting correctly.
To Next Page
Loading...