EasyManua.ls Logo

Thumbs Up Spy Pen - Page 4

Default Icon
4 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPY PEN CAMERA - 4 - Thumbs Up (UK) Ltd
Frequently Asked Questions:
Q: Why does the pen not work if I press the switch continuously?
A:
This product is designed to work with only one switch. This controls on/off, and
start/stop recording functions. Please read the instructions for full details of how to
use these functions correctly.
Q: Why do my recordings have sound but no picture?
A:
It’s possible that the camera in the pen is not correctly aligned with the hole and
the lens has been blocked. Use a small toothpick or adjust the angle of the lens. Do
not use a paperclip or metal pin as this may damage the lens.
Q: Why can my Spy Pen Video Camera not be found when connected to my
computer?
A:
Please check that you have correctly installed the driver CD.
Q: Why is the timestamp showing the incorrect time even after I have adjusted
it?
A:
The time will reset if the pen completely runs out of battery. If the battery is
completely run down, you will need to reset the time, as shown above.
Q: What should I do if my Spy Pen Video Camera stops working?
A:
Insert a pin or other pointed object into the small hole on the back of the
camera, below the indicator light, to press the reset switch. The original settings
will then be restored.
Imported & distributed by Thumbs Up (UK) Ltd
Ruislip, Middlesex, HA4 0EJ, UK
www.thumbsupuk.com