THUNDER TIGER EB4 S3 User Manual

Guidance on selecting appropriate fuel for the model engine, including nitro content and oil types.

Instructions for engine operation, including air filter use and caution about hot parts after operation.

Proper procedure for turning the radio transmitter and receiver on and off to avoid interference.

Emergency procedures for accidental contact with nitro fuel, including ingestion, eye contact, and skin contact.

Disclaimers regarding improper operation, construction, or usage, and user liability.

Adjusts the front toe angle by tuning the length of the left and right steering rod for stability and response.

Modifies the rear toe angle by changing toe blocks to influence steering and stability during corner exit.

Adjusts the front caster angle using plastic clips (shims) in the front upper hinge pin for cornering characteristics.

Adjusts front anti-squat angle using eccentric bushings in the front suspension plate for steering response and handling.

Adjusts rear anti-squat by replacing suspension holders to affect rear traction and handling during acceleration and cornering.

Adjusts front camber by changing the length of threaded parts of front pivot balls for steering response.

Adjusts rear camber by altering upper tie rod lengths to influence traction when entering corners.

Modifies front/rear ride height by adjusting setscrews in lower arms for handling on different track surfaces.

Adjusts Ackerman angle by linking front steering rods to different holes on the steering slider for steering response.