THUNDER TIGER RAPTOR 90 CLASS RC HELI - Rotor Head Assembly (Bag F)

20
No. Material No. Description Qty.
1 BK0292 2.3x24 Link Rod 2
2 HMC3-10B M3x10 Socket Screw 2
3 HMV694ZZ d4xD11x4 BRG 2
4 BK0408 Collar d3xD4x5.5 2
No. Material No. Description Qty.
5 BK0086 Ball Link 4.8 4
6 2-1-1 Flybar Seesaw Subassembly 1
7 2-1-2 Main Rotor Hub Subassembly 1
Rotor Head Assembly
2-1
BAG F
Make two pushrods for controlling blade pitch. The distance of 43 mm is measured between the center of two pushrod holes.
Attach the Seesaw Hub of the Control Paddle Assembly to the Main Rotor Head with No.2 Socket Screws, No. 3 Bearing.
Please add a small drop of Loctite along the entire length of the M3x10 Socket Screw (No.2 ) and on the outside of the collar
d3xD4x5.5(No.4).
Link the pushrod onto the Rotor Grip and Mixing Lever (See illustration in P.28)
43mm
(5)
(1)
(1)
(5)
(6)
(3)
(4)
(2)
(7)