TM40
THUNDERX3 User Manual
Click an action and drag the action box
to a key of your preference.
※To reselect or cancel, press the right
mouse click.
Press left mouse click to swap to the new
action.
Click “Apply” to confirm the change.
You can repeat the steps to assign other
fuctions or actions for other keys.
Function: Mouse Event
1. Select from one of the three profiles
2. Click “Button”
3. Select a main function.
For example：Mouse Event
4. Choose an action for that function.
For example：Mouse Left Click
Function: Keyboard Event (to execute a
keyboard action with a mouse click)
1. Select “Keyboard Event”
2. Choose a preset action from the list or
record your own.
Double click on
“Double Click Start Recording Hotkey”
Type in a key for a combination of keys.
For example: an “A” or “Ctrl+__(any letter)”
Keys that can be recorded are shown below
(1) F1~F12
(2) Shift
(3) Ctrl
(4) Ctrl+
(5) Win
(6) Alt
(7) Number key
(8) Word key
Click the action and drag the action box
to a key of your preference.
※To reselect or cancel, press the right
mouse click.
Press left mouse click to swap to the new
action.
Click “Apply” to confirm the change.
Function: Fire key
1. Select “Fire Key”
2. Assign fire key position/s
3. Assign a keystroke action to the mouse
4. Set the repeat times per mouse click
5. Set the delay time between each click
Click the action and drag the action box
to a key of your preference.
Braided Cable
4 DPI segment
With 4 Different colors
Avago 9800 Chipset
MAX 16000 DPI
16.8 Million Colors
Side Keys
Chapter Two : Button
2
1 2
3
4
1
2
2
1
2
2
2
3
4
5
Chapter One : Interface
Information Window
Displays current
settings on this mouse
Profile Selection
Save up to 3 profiles
Action Window
Save as
Save settings
Restore
Restore current profile
only
Reset all profiles
Confirmation of change
Load File
Load saved settings
Reset All
Apply
Language Selection
ThunderX3 Website
Hyperlink to official
website
Choose a language
Choose and assign
an action
Main functions
Actions
To Next Page
Need help?
General