9
USERS TUTORIAL
The sophisticated facilities of the DSA524 have resulted in a fairly complex instrument. This "hands-on" tutorial takes the user through
most of the functions of the unit step by step, and provides an easy method of gaining familiarity with its operation.
New users should follow the tutorial exactly and resist the temptation to experiment with functions before they have been covered.
Existing users may find the tutorial useful for covering functions with which they are not yet familiar. Each section is complete in itself
and commences with the DSA being "reset" using SHIFT followed by RESET, and with the signal generator being set to SINE, 20kHz,
5V pk-pk.
INDEX TO THE TUTORIAL
Page
Equipment Required 10
Setting up the Equipment 10
First Steps 10
What to Expect 10
The Display Oscilloscope 10
Front Panel Controls 10
Getting out of Trouble 10
Part One The Basic Functions.
Controlling Digitising 10
Controlling the Input Channels 11
Controlling the Traces 11
Setting the Timebase 12
Normal Mode 11
Roll Mode 12
Repeat Mode 12
Triggering 12
Part Two More Advanced Functions.
More about Triggering 12
More about Roll Mode 13
Memory Search 13
Display Update Rate 13
Indexed Waveform Memories 14
Cursor Measurement 14
Averaging 14
Dot Joining and Interpolation 14
Trace Multiply 15
Program Mode 15
Hardcopy Output 15
Remote Interfacing 15
A Final Word 15
To Next Page
Loading...
