To Next PageTo Next Page
Need help?Do you have a question about the Tier1 Elite Series and is the answer not in the manual?
General| Water Temperature Options | Hot, Cold, Room Temperature |
|---|---|
| Installation | Freestanding |
| Cooling System | Compressor |
| Hot Water Temperature | 85°C |
| Voltage | 120V |
| Dimensions | 41 inches |
| Material | Stainless Steel and Plastic |
| Child Safety Lock | Yes |
Provides essential information and warnings before beginning the installation process.
Highlights important safety messages, cautions, and warnings for user guidance.
Explains how to locate and interpret the control valve and system serial numbers for troubleshooting.
Emphasizes the need for a water test and details feed water line size and pressure requirements.
Provides instructions on lubricants, connections, pipe types, and the importance of professional installation.
Covers grounding continuity, electrical code checks, and handling the unit to prevent damage.
Provides critical cautions regarding depressurizing the unit, lubricant types, and wearing protective gear.
Covers connecting the bypass, inlet/outlet, and drain lines, emphasizing soldering techniques and fittings.
Illustrates the complete plumbing setup, including inlet, outlet, brine, drain lines, and check valve.
Provides critical notes on drain line connections, air gaps, and preventing back-siphoning of sewage.
Instructions for connecting the 12V transformer and understanding the control valve's LCD display information.
Guides on initiating a manual regeneration cycle to purge air and prepare the system.
Explains how to set the date, time, and hardness for the water conditioner.
Provides detailed steps for manual regeneration, emphasizing cycle completion and air purging.
Instructs on the correct amount of salt to add and the unit's automatic filling process.
Outlines annual inspection and replacement tasks for seals, spacers, injectors, and media.
Details essential safety steps before servicing the control valve, including shutting off water and power.
Provides solutions for problems like hard water delivery, failure to regenerate, and excessive salt usage.
Covers issues with continuous drain flow and explains how to resolve system error codes E1 and E2.
Details the factory default settings for upflow valve programming across different models.
Guides on setting the system's date, time, hardness, and initiating manual regeneration.
