Need help?Do you have a question about the Tiger Optics HALO M7000 Series and is the answer not in the manual?
General| Brand | Tiger Optics |
|---|---|
| Model | HALO M7000 Series |
| Category | Measuring Instruments |
| Language | English |
Explains the fundamental principles of Cavity Ringdown Spectroscopy (CRDS) for gas analysis.
Details the step-by-step process of how the CRDS technology functions within the analyzer.
Presents technical performance, technology, and gas sample condition specifications for the HALO analyzer.
Provides detailed physical dimensions and drawings for the HALO analyzer units.
Illustrates and describes the components and layout of the HALO analyzer's front panel.
Illustrates and describes the connectors and ports located on the HALO analyzer's rear panel.
Outlines the basic steps involved in the installation process of the HALO analyzer.
Provides instructions and precautions for safely unpacking the HALO analyzer and verifying contents.
Details the importance and procedure for preparing a high-integrity sample line for accurate low PPB measurements.
Guides the user through the proper assembly of the sample line, including material and fitting recommendations.
Explains the procedure for leak-testing the sample line using helium to ensure system integrity.
Provides guidance on selecting a suitable location and mounting the HALO analyzer.
Covers essential pressure requirements and venting procedures for the HALO analyzer.
Details the internal flow system and considerations for connecting sample lines to the HALO.
Provides instructions for connecting the prepared sample line to the HALO analyzer's inlet and outlet ports.
Guides the user through powering on the HALO and performing initial configuration for operation.
Explains how to cap inlet/outlet ports to prevent contamination when the unit is not in use.
Introduces the section detailing the basic operational procedures for the HALO analyzer.
Describes the graphical user interface, touch screen, and virtual keypad of the HALO analyzer.
Explains the different operating modes (Service, Tune, Measure, Shutdown) of the HALO analyzer and their purposes.
Discusses additional functions accessible via the toolbar, such as the Trend Graph.
Details the conditions that trigger a Ringdown Alarm and how it is indicated on the analyzer.
Explains how to establish a connection between the HALO analyzer and a computer for data transfer.
Provides instructions on how to capture and save measurement data from the HALO to a text file.
Outlines the commands used to delete data stored in the HALO analyzer's memory.
Provides an overview of controlling the HALO analyzer remotely via commands from a computer.
Describes how to interface with the HALO analyzer remotely using serial communication protocols.
Lists and explains the various ASCII commands available for controlling and querying the HALO analyzer remotely.
Provides an overview of the importance of periodic maintenance for optimal HALO analyzer performance.
Recommends routine maintenance tasks like Tune Cycles and Laser Optimization for continued accuracy.
Offers solutions for common problems encountered during HALO analyzer operation.
Details the procedures and requirements for returning the HALO analyzer for service or repair.
To Next Page