Removing and attaching the steam cap
Removing the steam cap
1
Insert your nger into the hole
in the lid and lift the steam cap
upwards.
Steam cap
2
Turn the inside portion of the
assembly as shown in the
illustration to loosen it.
3
Lift up on the inside portion to
separate it from the cap.
Attaching the steam cap
1
Set the inside portion of the
assembly on top of the cap
portion.
2
Turn the inside portion of the
assembly as shown in the
illustration to tighten it.
Align the markings.
3
Attach the steam cap back in
the lid.
To Next Page
Loading...
Need help?
General
