MAINTENANCE
© 2020 Alamo Group Inc.
MAINTENANCE
Weedoo Sickle Bar Mower Maintenance Section 4-4
REGULAR MAINTENANCE
The intervals at which regular servicing should be done are based on hours of operation.
DAILY OR EVERY 8 HOURS
ITEM SERVICE COMMENTS
Pivot Points Lubricate Inject grease until it appears at ends
Hydraulic Fittings Check for leaks Tighten when needed. Do Not use hands to
check for leaks, see maintenance precautions
Knives Check Inspect for missing or damaged knives, change
as needed
Knife mounting bolts Check Re-torque bolts to torque specications
in this section
Main Frame and Check Retorque bolts to torque specications in
Deck this section
Hydraulic Fluid Level Check Add if required per uid recommendations
To Next Page
Loading...