tiki Fire Pit Screen - Heat Deflector FAQs

PATIO PIT ACCESSORIES
12
Heat Deector
frequently asked questions
How long should I let the deflector cool prior to removing
from the fire pit?
You should allow the heat deflector to cool for 12 hours before removing
it from the fire pit.
How should I clean my heat deflector?
The heat deflector will develop soot on the surface after the first
couple of burns, which is normal. Cleaning of the deflector is not
recommended, as it will be diicult to remove all soot and will continue
to collect soot after continued direct flame exposure.
How can I store my heat deflector?
Invert the lower screen and place it inside the Fire Pit. Next, put the
heat deflector right-side up in the inverted lower screen. Place the
upper screen on top. If you own the stainless-steel tabletop, it can be
placed on top, along with the vinyl cover.
Is the screen required to use the heat deflector?
Yes, the heat deflector must be inserted in the lower screen for use.
Can the deflector be used with Wood Packs and cord wood?
Yes, the heat deflector can be used with both Wood Packs and cord
wood.