Necessary Tools for Race Event:
Spanners / Wrench Sizes: 8mm, 10mm, 13mm, 16mm, 17mm
Socket Sizes: 8mm, 10mm (x 2), 13mm (x 2), 17mm, 22mm
Allen Key Set: 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm
Measuring Tape
Snips / Pliers
Straight Edge Ruler / Laser Sprocket Aligner: For setting the position of sprocket so chain is aligned
Fuel Can / Fuel Funnel
Loctite
Duck Tape / Insulating Tape / Tie Wraps
Rubber Mallet
Tyre Pressure Gauge
Carburettor Pop-Off Tester
To Next Page
Loading...